Loading ...
Loading ...
Loading ...
Check Possible cause Procedure
Starter pawls. The starter pawls cannot move free-
ly.
Remove the starter cover and clean
around the starter pawls. Refer to
To
clean the cooling system and starter
pawls on page 24
.
Let an approved servicing dealer
help you.
Fuel tank. Incorrect fuel type. Drain the fuel tank and fill with cor-
rect fuel.
Carburetor Incorrect adjustment of the idle
speed
Adjust the idle speed with the idle
speed screw T.
Spark plug. The spark plug is dirty or wet. Make sure that the spark plug is dry
and clean.
The spark plug electrode gap is in-
correct.
Clean the spark plug. Make sure that
the electrode gap is correct. Make
sure that the spark plug has a su-
pressor.
Refer to
Technical data on page 30
for correct electrode gap.
The spark plug is loose. Tighten the spark plug.
Fuel filter The fuel filter is clogged. Replace the fuel filter.
The engine starts but stops again
Check
Possible cause Procedure
Fuel tank Incorrect fuel type. Empty the fuel tank and fill it with cor-
rect fuel.
Fuel filter The fuel filter is clogged. Replace the fuel filter.
Carburetor The idle speed is not correctly adjus-
ted.
Adjust the idle speed with the idle
speed screw T.
Air filter The air filter is clogged. Clean the air filter.
Transportation, storage and disposal
Transportation and storage
• Let the product cool before transportation or storage.
• Remove the spark plug cap before long-term
storage.
• Attach the product during transportation. Make sure
that it cannot move.
• Make sure that there is no risk of fuel leaks, fuel
fumes, sparks or flames during transportation and
storage.
• Attach the transport guard during transportation and
storage.
• Clean and do servicing on the product before long-
term storage.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as oil or fuel, at a service
center or at an applicable disposal location.
1018 - 011 - 07.06.2023 29
Loading ...
Loading ...
Loading ...