Loading ...
Loading ...
Loading ...
point. With correct balance, the risk of hitting stones if
you release the handlebar is decreased.
For grass clearing, the product is correctly balanced
when the blade is at cutting height near the ground.
To start a cold engine
1. Pull the choke control (A) up.
2. Push the decompression valve (B).
Note:
The decompression valve moves to the
initial position when the product starts.
3. Push the air purge bulb (C) about 6 times or fuel until
fuel starts to fill the bulb. It is not necessary to fill the
air bulb fully.
C
B
A
4. Hold the body of the product on the ground with your
left hand.
CAUTION: Do not step on the
product.
5. Pull the starter rope handle slowly until you feel
some resistance. When you feel resistance, pull the
starter rope handle quickly and with force.
Note: Do not twist the starter rope around your
hand.
6. Continue pull the starter rope handle until the engine
starts.
CAUTION: Do not pull the starter
rope to full extension and do not let go
of the starter rope handle. Release the
starter rope slowly. If you do not obey
these instructions it can cause damage
to the engine.
7. Set the choke control to the run position and apply
full throttle.
To start a warm engine (545F, 545FX,
545FXT)
1. Set the stop switch (A) to the start position.
2. Pull the choke control (B) up.
3. Set the throttle trigger (C) to the start position.
4. Push the air purge bulb (D) 10 times. It is not
necessary to fill the air purge bulb fully.
D
A
E
C
B
Note:
Do not use the decompression valve (E).
1018 - 011 - 07.06.2023 17
Loading ...
Loading ...
Loading ...