Loading ...
Loading ...
Loading ...
• Attach the air duct as shown in the illustration. Make
sure that the arrow points in the direction of the
winter mode symbol.
• If you operate the product in snow or below 5°C/
41°F, attach a cover on top of the starter.
• Replace the air paper filter with a nylon air filter that
is approved for operation in winter conditions. Refer
to,
To change from a paper air filter to a nylon air
filter on page 25
.
CAUTION:
Do not operate the product
at temperatures of more than 5°C/41°F if
it is adjusted for winter mode. The engine
becomes too hot and can be damaged.
Make sure that the winter mode adjustments
are removed before you operate the product
at temperatures more than 5°C/41°F.
To lubricate the wire
545FXT
Note: The wire is lubricated at the factory. Lubricate
the wire when it is necessary.
1. Remove the protective cover.
2. Remove the cylinder cover to get access to the
rubber bellows on the wire.
3. Make sure that the rubber bellows does not expand.
4. Remove the plug on the grease nipple.
5. Use antifreeze spray with a 2 mm spray tube. Spray
with short intervals.
6. Attach the cylinder cover and the protective cover.
Troubleshooting
The engine does not start
Check Possible cause Procedure
Stop switch. The stop switch is in the stop posi-
tion.
Let an approved servicing dealer re-
place the stop switch.
28 1018 - 011 - 07.06.2023
Loading ...
Loading ...
Loading ...