Loading ...
Loading ...
Loading ...
4.8 AMP JIG SAW 9
OPERATING INSTRUCTIONS
1. Blade Installation
WARNING:Always ensure that the jig saw is switched off and plug is removed from
the power point before making any adjustment.
a) Pull the tool-less blade clamp backwards and hold it.
b) Place the saw blade as far as it will go, ensuring that the blade rear edge is located
and supported by the blade roller guide.
c) Release the tool-less blade clamp.
d) Pull down on the blade to verify that the blade is securely locked in place before
using it to cut any materials
CAUTION: The blade roller guide supports the blade when cutting and must at all
times rest against the back edge of the blade. It should rotate freely.
e) To remove the blade, push down the tool-less blade clamp and remove the blade.
1
2
1
Loading ...
Loading ...
Loading ...