Loading ...
Loading ...
Loading ...
4.8 AMP JIG SAW 13
OPERATING INSTRUCTIONS
5. Switch on and off
WARNING: Always check that
the power supply is the same as that
indicated on the nameplate of the tool.
a) The tool is started by squeezing
the on/off trigger switch. Release
the trigger to stops the tool.
b) The tool is equipped with a lock-
on button which can be pushed to
left or right direction for your left
or right hand operation easily. If
you press the lock-on button while
the trigger switch is depressed, the switch is kept in the operating position.
c) To release the lock on button, press and release the trigger switch.
WARNING: Allow the blade to come to a complete standstill before setting the jig
saw down.
d) The lock-on button allows the operator to keep the jigsaw motor running without
continuously pressing the switch. It is useful when operating the tool for extended
periods.
6. Speed controller
Adjusting the speed to suit the application
enhances cutting performance and saves
the blade from undue wear. To determine
optimum cutting speed first perform test
cuts on offcuts of the workpiece to be
cut. Rotate the speed controller. To set
the blade speed. Position “1” denotes the
lowest speed. Position “6” denotes the
highest speed.
1
2
5
6
6
Loading ...
Loading ...
Loading ...