Loading ...
Loading ...
Loading ...
10 4.8 AMP JIG SAW
OPERATING INSTRUCTIONS
2. Angle adjustment
The jig saw shoe plate can be angled to enable bevel or chamfer cuts.
WARNING: Always ensure the tool is switched off and the plug is removed before
making any adjustments or maintenance procedures.
a) Turn the product upside down.
b) Use the hex key to loosen the hex screws securing the blade guide assembly and
the shoe plate.
c) Move the base plate backwards so that the teeth on the plate no longer engage with
the retaining teeth and the shoe can be tilted to the left or right. Choose ±45°, ±30°,
±15°or 0°.
d) Push the shoe plate forwards so that the teeth on the plate mesh with the retaining
teeth.
e) Re-tighten the hex screws.
NOTE: For accurate work it is necessary to do a practice cut first. Check the cut and reset
the angle until the correct cut is achieved. The blade guide supports the blade when cutting
and must always rest against the back of the blade.
2
1
3
2
Loading ...
Loading ...
Loading ...