Loading ...
Loading ...
Loading ...
4.8 AMP JIG SAW 17
TROUBLESHOOTING
Suspected malfunctions are often due to causes that the users can fix themselves. Therefore,
check the product using this section. In most cases the problem can be solved quickly.
WARNING: Only perform the steps described within these instructions! All further
inspection, maintenance and repair work must be performed by an authorised service centre
or a similarly qualified specialist if you cannot solve the problem yourself!
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Product does not start.
Not connected to power
supply.
Connect to power supply.
Power cord or plug is
defective.
Have the tool serviced by an
Authorized Service Center.
Other electrical defect to the
product.
Have the tool serviced by an
Authorized Service Center.
Product does not reach
full power.
Extension cord not suitable
for operation with this
product
Use a proper extension cord
Power source (e.g.
generator) has too low
voltage
Connect to another power
source
Air vents are blocked. Clean the air vents
Product overload Remove the tool from the
workpiece then switch on
again
Unsatisfactory result
Blade is worn Replace with a new one
Blade not suitable for
workpiece material.
Use proper blade.
Loading ...
Loading ...
Loading ...