Bosch 06008A7972 High Pressure Washer EasyAquatak 120 (1500W, Home and Car Kit Included, Max. Flow Rate: 350l/h, in Cardboard Box) - Amazon Exclusive, Green, 37.5 cm*40.0 cm*20.0 cm

User Manual - Page 12

For 06008A7972.

PDF File Manual, 296 pages, Download pdf file

Loading ...
Loading ...
Loading ...
12 | English
Never direct the water jet at
people, animals, the machine
or electric components.
Warning: High pressure jets can be
dangerous if subject to misuse.
According to the applicable
regulations, the appliance
must never be used on the
drinking water network without a
system separator. Use a separator
as per IEC61770 Type BA.
Water flowing though a system sep-
arator is considered not drinkable.
Safety Notes for pressure washer
Read all safety warnings
and all instructions. Failure
to follow the safety warnings
and instructions may result in electric
shock, fire and/or serious injury.
The warning and information signs
attached to the unit provide import-
ant information for safe operation.
Apart from the information in the
operating instructions comply with
the general safety regulations and
regulations for the prevention of ac-
cidents.
Connecting to the mains
u The voltage of the power source
must correspond with the data on
the type plate of the product.
u We recommend that this product is
only connected into a socket which
is protected by a circuit-breaker that
would be actuated by a 30mA resid-
ual current.
u The circuit breaker supplying mains
power to the high-pressure washer
should have no less than a C16 rat-
ing. If in doubt consult a qualified
electrician for further advice. Do not
attempt to modify your electrical
system yourself.
u Remove the plug from socket
whenever the machine is left unat-
tended for any period.
u The electric supply installation
should comply with IEC60364-1.
u If the supply cord is damaged, it
must be replaced by the manufac-
turer, its service agent or similarly
qualified persons in order to avoid a
hazard.
u If the plug is damaged, pay attention
to the following:
u Plugs and sockets situated near the
work site or outdoors should be to
class IP 55 of BS 5490 to provide
adequate protection against ingress
of water, etc. and cable entries re-
quire effective sealing. Rubber
shrouds should be provided over
cable glands. Drip-proof (class IP X2
of BS 5490) plugs and sockets to BS
4343 are suitable for use indoors
where the plug is away from the wa-
ter spray area where the appliance is
in use.
u Never touch the mains plug with wet
hands.
F 016 L94 123 | (27.01.2021)Bosch Power Tools
Loading ...
Loading ...
Loading ...