Loading ...
Loading ...
Loading ...
Problema
Razón
Solución
La cerradura no funciona correctamente
después que el conjunto de baterías es
retirado y reemplazado.
Incorrect initialization due to
remaining charge.
Iniciación incorrecta causada por la carga
de la batería.
Remove battery pack. Press
and hold the Program button for
10 seconds, then reinsert the
battery pack. If successful, the
LED will flash green and you will
hear a beep, indicating proper
initialization. If unsuccessful,
attempt this procedure again.
Retire el conjunto de baterías. Mantenga
presionado el botón Programa por 10
segundos y reinstale el conjunto de
baterías. Si el proceso fue satisfactorio,
el LED titilará en color verde y
escuchará un pitido, que indica que se
inició correctamente. De lo contrario,
repita el proceso una vez más.
Puedo ver la cerradura en mi
controlador, pero no puedo controlarla.
Light module or switch is not
beaming capable.
El módulo o interruptor de luz no tiene
capacidad de transmisión.
Ensure that the light module or
switch being used is beaming
capable.
Verifique que el módulo o interruptor de
luz que se utiliza tenga capacidad de
transmisión.
PREGUNTAS FRECUENTES
ENGLISH
How long will the lock operate on a set of batteries?
Based on 10 operations per day, a single set of Alkaline batteries will operate the lock for over a year.
What type of batteries do you recommend?
For best results, use new non-rechargeable Alkaline batteries only.
I am planning to be away for several months; will my lock operate when I get back?
When the system is idling, it consumes minimum power (very close to battery shelf life.) With alkaline
batteries, the lock should be operable after years of idle.
I replaced my batteries less than a year ago and need to replace them again.
Check door alignment. If the SmartCode makes several attempts to lock or unlock the door, it may
mean that the door is warped and the latch does not line up correctly with the strike. Operating the lock
excessively reduces battery life. Avoid turning on the keypad light unnecessarily.
What settings should I use to get the maximum battery life out of my lock?
Set switches #1, #2, and #3 to the OFF position.
22
Loading ...
Loading ...
Loading ...