Loading ...
2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the installation,
operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings may affect
your warranty.
Statement of Intended Use
Tripp Lite Medical-Grade UPS Systems are intended to support and protect non-medical and
medical computer equipment and medical devices in non-mobile applications that require leakage
current reduction, surge protection, voltage regulation, line noise filtering and battery backup during
power outages and generator testing, both inside and outside patient care vicinities. Tripp Lite’s
Medical-Grade UPS Systems come with hospital-grade plugs and receptacles that reduce leakage to
below 100μA.
Note: The SMART700HG and SMART1200XLHG contain lead acid batteries designed to be connected
continuously to an AC power source, except during brief power outages. They are not intended for frequent charge/
discharge cycles, such as mobile cart applications where the UPS is often disconnected from an AC power source.
Using the SMART700HG or SMART1200XLHG in these types of applications will void the Tripp Lite battery warranty
and battery replacement will be the user’s responsibility. For mobile applications, a UPS system with a lithium
iron phosphate battery is recommended, such as Tripp Lite’s SMART700HGL or SMART1200XLHGL. Lithium iron
phosphate batteries provide up to 10,000 cycles, 20-30 times the cycle life of traditional batteries, making them
ideal for mobile cart applications. Visit www.tripplite.com for more information.
Product Information
OMNISMART350HG SMART700HG SMART1200XLHG
AC Input Voltage 120 120 120
AC Input Voltage Range 83–147 81–143 81–143
Input Amp(s) 2.3 5.5 9.2
Output Amp(s) 1.9 5.8 6.25
Rated Power (VA/Watts) 330VA/225W 700VA/450W 1000VA/750W
Frequency 60 Hz 60 Hz 60 Hz
No. of Phases Single Single Single
Class Type Class I Class I Class I
Plug/Connector Type NEMA 5-15P NEMA 5-15P NEMA 5-15P
Operation Continuous Continuous Continuous
AC Input Protection (Qty./type/rating) Input breaker
(2 x 3.5A), thermal
Input breaker
(2 x 10A), thermal
Input breaker
(2 x 15A), thermal
Max Leakage Current (uA) Less than 100uA Less than 100uA Less than 100uA
Weight 25 lb. (11.3 kg) 44.2 lb. (20 kg) 45.2 lb. (20.5 kg)
Known Contraindication None None None
UPS Location Warnings
Relevant Symbols
Denotes that information in the manual should be reviewed before use.
Used to signal a warning that a statement is particularly important and could pose a safety
risk.
Warning-Dangerous Voltage No sitting
Denotes general warning sign No stepping on surface
Refer to Instruction Manual/Booklet No pushing
Loading ...
Loading ...
Loading ...