Loading ...
Loading ...
Loading ...
Bringing up the lower thread
Hold the upper thread with the left hand. Turn
the handwheel towards you with your right
hand until the needle goes down and comes
up again to its highest position. (1)
- Lightly draw the needle thread forming a loop
with the bobbin thread. The upper thread
should have caught the lower thread in a loop.
- Pull the needle thread toward you and the
lower thread will come up from the bobbin in
a large loop. (2)
Pull about 15 cm. (6") of both thread away
from you under the presser foot.
0 Subir el hilo inferior
Sujetar la punta del hilo superior con la mano.
Girar el volante hacia adelante hasta que la
aguja est_ de nuevo en su posici6n m_.s alta. (1)
Tirar del hilo superior con Io que se hace subir
el hilo inferior a traves del agujero de la placa
de la aguja. Llevar los dos hilos hacia atr_.s,
por debajo del pie. (2)
Remonter le fil inferieur
Lever la barre du pied presseur. Tenir le fil
sup_rieur de la main gauche et avec la main
droite, tourner le volant vers vous jusqu'a ce
que I'aiguille descende et remonte _.son plus
haut point. (1)
- Tirer legerement le fil superieur pour que la
boucle formee par le fil inf_rieur apparaisse
la surface de la plaque _. aiguille. Sortir la
boucle de la plaque _.aiguille _.la main.
- Passer les deux ills sous le pied-de-biche et
les faire depasser de 10cm (3") environ vers
I'arriere.
31
Loading ...
Loading ...
Loading ...