Loading ...
Loading ...
Loading ...
11
TOOL
13-15mm Wrench
ASSEMBLY
STEP 1
1A. Setting Up the Frames: Pull apart the Front Frame (2) and the Rear Frame (1). Rest the
Rear Frame Support Tube (67) into the hooked plate on the Rear Frame (1). Align the pin holes
where the Front Frame (2) and Rear Frame (1) intersect and insert the Safety Pin (22) into the
aligned holes. See Figure A. The aligned holes can be found by tracing the Safety Pin (22) in the
illustration.
1B. Installing the Front Stabilizer: Attach the Front Stabilizer (31) to the Front Frame (2) with
two Hexagon Cap Nuts (29), two Spring Washers (102), and two Curve Washers (30).Then
tighten the Hexagon Cap Nuts (29) using the 13-15mm Wrench provided.
1C. Installing The Rear Stabilizer: Attach the Rear Stabilizer (3) to the Rear Frame (1) with two
Hexagon Cap Nuts (29), two Spring Washers (102), and two Curve Washers (30). Then tighten
the Hexagon Cap Nuts (29) using the 13-15mm Wrench provided.
HARDWARE PACK
(29) Hexagon Cap Nut
4PCS
(102) Spring Washer
4PCS
(30) Curve Washer
4PCS
(22) Safety Pin
1PC
Figure A
Loading ...
Loading ...
Loading ...