Loading ...
Loading ...
Loading ...
7
Air connection
Compressed Air is supplied through the quick-connector/gauge located at the short end of the
Applicator – this is where you also will find the CE-label, switches & controls – see above picture. During
operation: recommended 6 – 6,5 bar air pressure, filtered and moisture free air – max pressure 8 bar.
The quick connector fixed to the gauge fits an air hose w/clamp coming from the compressor. If needed,
the connector can be unscrewed from the gauge to connect with a standard ¼’’ threaded connector of
your preference.
Power connection
230V AC 50Hz/120V AC 60Hz or adapted to the local standard
Power plug may only be connected to sockets with 230V AC/120V AC. All other interventions to
the electrical system may only be performed by authorized staff. For markets with deviating voltage, the
applicator will be adapted to local standard.
Access to internal air- and electrical connections
All internal connections for air and electricity is placed behind the cover at the short end of the table. To
access these, loosen the upper two screws and flip the cover outwards. It will stop in a horizontal
position, allowing for inspection or repair.
Loading ...
Loading ...
Loading ...