Loading ...
Loading ...
Loading ...
4
Warning symbols
Before you start using your Rollover Flatbed Applicator you should read this manual carefully. This will
give you the opportunity to handle the machine in the best possible way so you can avoid damages both
to the machine and operator.
See the Contact a Risk of crushing Electrical hazard
manual technician between roller and
glass bed
Safety
The pneumatic pressure of the roller against the table may cause crush injury. It is vital to be aware of
this when operating the Rollover, especially if there is more than one person involved in the process.
Personal safety equipment
Specific personal safety equipment is not required for normal use of the Rollover.
Testing, control and use of safety functions.
During installation, service and maintenance, the safety functions must be tested. This includes
functions such as emergency stop, power failure and loss of pressure. When trigging the emergency
stop switch and in the occurrence of power failure, the roller will automatically raise. If the pneumatic
pressure lapses, the roll will lower slowly and stop about 3 mm over the working surface. In this
situation there is no crushing hazard.
Loading ...
Loading ...
Loading ...