Loading ...
Loading ...
Loading ...
12
Daily maintenance
Every day
• Make sure that the rubber roller is not damaged and has no objects stuck to it.
• Check the emergency stop function and reset switch.
• Wipe any dust and make sure that the working surface is clean from particles that can damage
the roller or reduce the quality of applications.
Keep the aluminum profile guiding the supporting bearings of the sliding
arms clean!
Once a week:
• Wipe any dust/dirt off the aluminum profiles on each side where the support bearings of the
sliding arms run.
Once a month:
• Your Rollover is connected to a compressor. See the maintenance manual for the compressor. It
is important that condensation water is emptied as well as using a dryer filter to avoid any
humidity in the pneumatic system of the machine, as this can cause corrosion and potential
damage.
When necessary:
• Check that there are no damages to the rubber roller.
• Check the surface of the self-healing cutting mat – if worn out and in need of a replacement mat
please contact your local dealer or mail us on: [email protected]
Loading ...