Loading ...
Loading ...
Loading ...
Programme chart
32
Outerwear Cold to 40°C Max. load 2.5 kg
Items Performance outerwear (e.g. jackets and trousers) made from
membrane fabric such as Gore-Tex®, SYMPATEX®,
WINDSTOPPER®, etc.
Notes - Close any zips and Velcro fasteners before washing.
- Do not use fabric softener.
- If required, these items can also be reproofed using the
Proofingprogramme. Reproofing after each wash cycle is not
recommended.
Proofing 40°C Max. load 2.5 kg
Items Treating microfibre fabric, ski wear or table linen made from mainly
synthetic fibres to provide a finish that is resistant to water and dirt.
Notes - The items should be freshly laundered and spun or dried before
proofing.
- For best results, the items should be heat-treated afterwards. This
can be achieved by drying them in the tumble dryer or by ironing
them.
Drain/Spin –
Notes - Drain only: Set spin speed to.
- Make sure you select the appropriate spin speed.
Separate rinse/Starch Max. load 7.0 kg
Items - For rinsing hand-washed items.
- For starching table cloths, serviettes and workwear.
Notes - Reduce the spin speed for fabrics that crease easily.
- Laundry that is to be starched should be washed but not treated
with fabric softener.
- Items will be rinsed very effectively with 2 rinses by activating the
Water +Extra.
Loading ...
Loading ...
Loading ...