Loading ...
Loading ...
Loading ...
Spinning
28
Final spin speed in wash
programmes
When a programme is selected, the
sensor for the optimum spin speed for
that programme will be brightly lit up in
the control panel.
A faster spin speed can be selected for
certain wash programmes.
The highest selectable spin speed is
indicated in the table.
Programme rpm
ECO 40-60 1400
Cottons 1400
Minimum iron 1200
Woollens 1200
Delicates 900
Express 20 1200
Dark garments/Denim 1200
Outerwear 900
Proofing 1200
Drain/Spin 1400
Separate rinse/Starch 1200
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for the
Cottons programme, an additional rinse
is introduced.
Deselecting final spin (Rinse
hold)
Touch the sensor repeatedly until
the indicator (Rinse hold) lights
up.
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
Ending a programme with a spin
cycle
The indicator with the ideal spin speed
lights up. You can change the spin
speed with the sensor.
Touch the sensor.
Ending a programme without a spin
cycle
Touch the sensor repeatedly until
the indicator (without spin) lights
up.
Touch the sensor.
Deselecting the interim spin
and the final spin
Touch the sensor repeatedly until
the indicator (without spin) lights
up.
After the last rinse, the water will be
pumped away and the Anti-crease
phase will switch on.
In some programmes an additional rinse
is introduced with this setting.
Loading ...
Loading ...
Loading ...