Loading ...
Loading ...
Loading ...
E323448
Press the button on the center
console. The button illuminates
when you switch the system on
and press again to switch the system off.
Note: You can only switch the system on
after you close the driver door and start the
engine.
Note: The system remembers the last setting
when you start your vehicle.
Make sure you switch the system off before
towing with your vehicle or before using an
automatic car wash.
USING AUTO HOLD
1. Bring your vehicle to a complete stop.
The auto hold active indicator illuminates
in the information display.
2. Release the brake pedal. The system
holds your vehicle at a standstill. The
auto hold active indicator remains
illuminated in the information display.
3. Apply the accelerator and drive off in a
normal manner. The system releases the
brakes and the auto hold active indicator
switches off.
Note: The system only activates if you apply
enough brake pressure on the brake pedal
to bring the vehicle to a standstill.
Note: Under certain conditions, the system
could apply the electric parking brake. The
brake system warning lamp illuminates. The
electric parking brake releases when you
press the accelerator pedal. See
Automatically Releasing the Electric
Parking Brake (page 226).
Note: The system switches off if you shift
into reverse (R) or neutral (N) while pressing
the brake pedal.
There could be actions that can cause the
auto hold system not to work when the
following occur:
• When you use active park assist.
• Your vehicle is in stay in neutral mode.
• The driver door is open.
• You shift into reverse (R) or neutral (N)
before the system is active.
AUTO HOLD INDICATORS
E323448
Illuminates when the system is
active.
E323449
Illuminates when the system is on
but cannot hold your vehicle at a
standstill at this particular time.
240
2024 Nautilus (CFG) Canada/United States of America, enUSA, Edition date: 202310, DOM
Auto Hold
Loading ...
Loading ...
Loading ...