Loading ...
Loading ...
Loading ...
23 24
Step 12: Completing the Installation Continued
6. Install the decoration door to the outer door of the dishwasher.
Install the hook and brackets on the dishwasher panel, see Figure 17.
Put the hook into the slot of the outer door, see Figure 18.
Fix the dishwasher panel onto the outer door with the correct screws and
bolts, see Figure 19.
7. Adjust the tension of the door spring.
The door springs are set at the factory to the proper tension of a field
installed ZLINE panel. If a custom panel is installed, you will have to adjust
the door spring tension.
Rotate the adjusting screw to drive the adjuster to strain or relax the steel
cable, see Figure 20.
Door spring tension is correct when the door remains horizontal in the fully
opened position, yet rises to a close with the slight lift of a finger.
installing the dishwasher
Figure 18Figure 17 Figure 19
Figure 20
Scan QR code for “How
to Install Your ZLINE
Designer Dishwasher Panel
To Our Dishwasher” Video
Specifications are subject to change without any notice for quality improvement
purposes. The actual appearance of the dishwasher may differ from the illustrations in
this manual.
Specifications for Model DW7714-18
Specifications for Model DW7713-24
Power Supply 120 Volts, 60 Hz
Water Pressure 20 PSI -145 PSI
Dimensions 17.7” x 22.8” x 32.5”
Inlet Water Temp 120°F
Power Supply 120 Volts, 60 Hz
Water Pressure 20 PSI -145 PSI
Dimensions 23.6” x 22.8” x 32.5”
Inlet Water Temp 120°F
ZLINE’s exclusive integrated EcoWash technology and
EnergySave functionality determine the most environmentally-
conscious cycle based on the load size and soil level. Each
cycle reduces water consumption by up to 30% while delivering
optimal cleaning results.
Specifications
SCAN ME
Loading ...
Loading ...
Loading ...