Loading ...
Loading ...
Loading ...
17 18
Firstly, put the installation bracket into the slot of the side plane and tighten to the
dishwasher with screw ST3.5*9. Secondly, insert the provided screws into the holes,
and then tighten to secure the dishwasher to the cabinet. Make sure the tub is not
distorted by pressure from the screws.
If the tub is distorted, loosen the screws a little.
Replace the tub spacer caps.
Step 9: Securing the Dishwasher Continued
The screws or tub spacer cap may fall into the dishwasher while you are working with
the door open.
Cover the interior of the dishwasher with a towel to prevent any screws from falling
into the dishwasher. If any foreign items such as a screw get into the dishwasher, it
may cause noise, an abnormal operation, damage,
or a malfunction.
Use a magnetic screwdriver to help prevent screws from falling into the dishwasher.
If a foreign item, such as a screw, gets into the dishwasher and you are unable to
remove it, the dishwasher needs to be disassembled. Contact a qualified service
technician for this.
Figure 9
Step 9: Securing the Dishwasher
You must fix the dishwasher to the countertop or cabinet side walls for additional
stability.
If the countertop is made of wood or the material will not be damaged by drilling,
follow the instructions in 1 below.
If the countertop is made of granite, marble, or any other material that can be
damaged by drilling, follow the instructions in 2 below.
Clean the underside of the countertop where the dishwasher will go. Measure and
cut the condensation strip to match the opening. Attach the condensation strip to the
underside of the counter, close the front edge. This disperses the steam away from the
edge of the dishwasher.
1. Put a large towel into the bottom of the dishwasher to prevent wood shavings or a
dropped screw from falling into the dishwasher.
Carefully drill screw holes into the counter top bottom by passing the drill bit through
a screw hole in each bracket, and then drilling into the counter top bottom beneath.
Make sure the hole you drill is smaller than the diameter of the screw.
Firstly, put the installation bracket into the slot of the side frame and tighten to the
dishwasher with screw ST3.5*9. Secondly, insert the provided screws into the
brackets, and then tighten to secure the dishwasher to the counter top.
2. Put a large towel into the bottom of the dishwasher to prevent wood shavings or a
dropped screw from falling into the dishwasher. Remove the adjustment cap with the
tip of a screwdriver. The caps are just inside the tub near the middle of the tub an both
sides (Figure 9 on the next page).
Drill a hole into the sides of the kitchen cabinet on both sides by carefully passing a
drill bit through the screw holes exposed by the removal of the spacer caps, and then
drilling into the cabinet side beneath.
Make sure the hole you drill is smaller than the diameter of the screw.
Also make sure the drill bit does not strike the sides of the spacer cap holes.
installing the dishwasher installing the dishwasher
Figure 8
Figure 10
Loading ...
Loading ...
Loading ...