Loading ...
Loading ...
Loading ...
15
ENG
CAUTION!
Before troubleshooting, disconnect the power supply. Only a qualified electrician of competent person
must do the troubleshooting that is not in this manual.
IMPORTANT! There are some sounds during normal use (compressor, refrigerant circulation).
TROUBLESHOOTING
Problem Possible cause Solution
Appliance does not
work
Temperature regulation knob is set at
number “0”.
Set the knob at other number to
switch on the appliance.
Power plug is not plugged in or is loose Insert power plug.
Fuse has blown or is defective Check fuse, replace if necessary.
Socket is defective
Socket malfunctions are to be
corrected by an electrician.
The food is too warm.
Temperature is not properly adjusted.
Please look in the initial
Temperature Setting section.
Door was open for an extended period.
Open the door only as long as
necessary.
A large quantity of warm food was placed
in the appliance within the last 24 hours.
Turn the temperature regulation
to a colder setting temporarily.
The appliance is near a heat source.
Please look in the installation
location section.
Appliance cools too
much
Temperature is set too cold.
Turn the temperature regulation
knob to a warmer setting
temporarily.
Unusual noises
Appliance is not level. Re-adjust the feet.
The appliance is touching the wall or
other objects.
Move the appliance slightly.
A component, e.g. a pipe, on the rear of
the appliance is touching another part of
the appliance or the wall.
If necessary, carefully bend the
component out of the way.
Water on the floor Water drain hole is blocked.
See the Cleaning and Care
section.
Side panels are hot.
It’s normal. Heat exchange parts are in
the sides.
Take gloves to touch sides.
If the malfunction shows again, contact the Service Center.
Loading ...
Loading ...
Loading ...