Loading ...
Loading ...
Loading ...
14
ENG
Replace the lamp
CAUTION!
Before replacing the lamp, shall disconnect the appliance from mains power supply.
Lamp specification is listed in rating label.
Follow below process to replace the lamp:
1. Set the temperature regulation knob at number “O” to switch off the appliance.
2. Unplug the appliance to make sure the appliance is
disconnected from main power supply.
3. Remove the screw of the lamp cover.
4. Pull the lamp cover out.
5. Unscrew the lamp.
6. Fit new lamp according to the opposite direction, then
replace the lamp cover and screw.
7. Plug in the appliance and regulate the knob to right position.
cleaning switch the appliance off and remove the
plug from the mains, or switch off or turn out the
circuit breaker or fuse. Never clean the appliance
with a steam cleaner. Moisture could accumulate in
electrical components, danger of electrical shock!
Hot vapors can lead to the damage of plastic parts.
The appliance must be dry before it is placed back
into service.
Important! Ethereal oils and organic solvents
can attack plastic parts, e.g. lemon juice or the
juice form orange peel, butyric acid, cleanser that
contain acetic acid.
• Do not allow such substances to come into
contact the appliance parts.
• Do not use any abrasive cleaners
• Remove the food from the freezer. Store them in
a cool place, well covered.
• Switch the appliance off and remove the plug
from the mains, or switch off or turn out the
circuit breaker of fuse.
• Clean the appliance and the interior accessories
with a cloth and lukewarm water. After cleaning
wipe with fresh water and rub dry.
• After everything is dry place appliance back into
service.
Loading ...
Loading ...
Loading ...