Loading ...
Loading ...
Loading ...
!
GPDR!!!!!2'Cycle!Pile!Driver!Instruction!Manual!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!7!
When the engine has started, open the choke completely. After idling for approximately 5 minutes,
you can start working.
OPERATION
After engine is started, allow 5 minutes idle operation to warm up the machine.
When the engine is warmed up, press throttle handle to the appropriate speed.
Note: The unit will provide low or medium-speed for work in the first 6 hours of operation and the
maximum throttle should not be used.
High-speed operation of pile driver during non-piling is prohibited.
TURNING OFF MOTOR
Release throttle handle and allow
to idle for 3-5 minutes.
Pull Stop Switch.
MAINTENANCE
Fuel filter
If the fuel filter is blocked, the pile driver will have reduced speed and weaker impact energy.
① Open the Fuel Tank
lid. Remove fuel filter from Fuel Tank with a metal hook or pliers.
② When cleaning the fuel filter, clean
the Fuel Tank at same time. See Fig.14, 15 and 16.
Stop!Button!
Fig.!14!
Fig.!13!
Fig.!15!
Loading ...
Loading ...
Loading ...