Sportsman 802412 Earth Series 32.7cc Gas Powered T-Post Driver

ASSEMBLY & OPERATING INSTRUCTIONS - Page 16

For 802412.

PDF File Manual, 16 pages, Read Online | Download pdf file

802412 photo
Loading ...
Loading ...
Loading ...
!
GPDR!!!!!2'Cycle!Pile!Driver!Instruction!Manual!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!16!
Repair or replacement of any warranted part under the warranty provisions herein must be performed at a warranty station
at no charge to the owner.
Notwithstanding the provisions herein, warranty services or repair will be provided at all of our distribution centers that are
franchised to service the subject engines.
The engine owner must not be charged for diagnostic labor that leads to the determination that a warranted part is in fact
defective, provided that such diagnostic work is performed at a warranty station.
Buffalo Corp. is liable for damages to other engine components proximately caused by a failure under warranty of any
warranted part.
Throughout the engine warranty period stated above, Buffalo Corp. will maintain a supply of warranted part sufficient to
meet the expected demand for such parts.
Any replacement may be used in the performance of any warranty maintenance or repairs and must be provided without
charge to the owner. Such use will not reduce the warranty obligations of Buffalo Corp.
Add-on or modified parts that are not exempted by the Air Resources Board may not be used. The use of any non-
exempted add-on or modified parts by the ultimate purchaser will be grounds for disallowing a warranty claims. Buffalo
Corp. will not be liable to warrant failures of warranted parts caused by the use of a non-exempted add-on or modified part.
The manufacturer issuing the warranty shall provide any documents that describe that manufacturer’s warranty procedures
or policies within five working days of request by the Air Resources Board.
EMISSION WARRANTY PARTS LIST
(1) Fuel Metering System:
(a) Gasoline carburetor assembly and its internal components
(b) Carburetor gaskets
(c) Fuel line
(d) Clamps
(e) Fuel tank
(f) Fuel line fittings
(g) pressure regulator (if equipped)
(h) Mixer assembly and its internal components (if equipped)
(2) Air induction system including: (a) Intake pipe/manifold
(b) Air cleaner
(3) Ignition system including: (a) Spark plug (b) Ignition coil
(4) Catalytic muffler assembly including: (a) Muffler gasket (b) Exhaust manifold (c) Catalytic converter if
available
(5) Crankcase breather assembly including (a) Breather connection tube
(6) Fuel tank evaporative emissions control system including:
(a) Purge valves (b) Carbon canister (c) canister Mounting Brackets (d) Fuel Cap (e) Fuel Tank
(7) Miscellaneous items used in above systems including: (a) Switches (b) Hoses, belts connectors, and
assemblies
(8) Air injection system (a) Pulse valve
!
2 0 1 9 12