Loading ...
Loading ...
Loading ...
!
GPDR!!!!!2'Cycle!Pile!Driver!Instruction!Manual!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!4!
SPECIFICATIONS
Engine type Single cylinder, air cooling, 2 stroke, cylinder diameter × stroke: 36×32mm
Fuel Mixed oil (Gasoline: two-stroke engine oil= 50:1)
Fuel tank capacity 1.0675 quart (34.16 ounces)
Weight 28.66 lbs
Displacement 32.7CC
Max power/speed 0.9KW/7500r/min Spark plug type L6T
Max torque/speed 1.45N.m/5000r/min
Fuel consumption ≤0.50L/h
Impact frequency 1700~2230 RPM
Impact energy 20~45J
Carburetor type 1E36F-2E.1A"
EPA Approved
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS
1.
The operator must wear slip-resistant safety shoes and suitable clothing. For long-time
operation, the operator must wear goggles, helmet and ear protection.
2.
While operating the machine, please keep balance of body; the user should stand behind the
support handle and operate the machine. While operating the machine, do not smoke, eat or
chat.
3.
After starting the machine, do not carry out one-handed operation.
4.
While lifting the machine, do not pull Throttle Switch.
5.
Non-staff shall stay away from operating area to avoid injury.
6.
Select the medium speed to operate pile driver.
7.
Keep the handle dry and clean without greasy oil or fuel mixture.
8.
If operation is stopped midway: turn off the engine.
9.
Always check whether fastening screws of the connector is tightened before use. If it’s loose, you
must tighten the screws before use.
10.
Gasoline is highly flammable. Replenish fuel in a well-ventilated environment. During fuel
filling,
gasoline engine must be turned off. Do not use pure gasoline, use the appropriate 2-stroke
engine oil.
11.
Do not over fill. The oil shall not exceed the neck of oil filer of Fuel Tank. If fuel spills, wait
until
the fuel volatilizes completely and then start the machine.
12.
Gasoline is highly flammable. Refuel in a well-ventilated environment. When refueling, please turn
off the gasoline engine.
13.
After refueling, tighten the oil lid. During operation, check whether Fuel Tank is damaged and
leaking. If damage is found, turn off the machine immediately for replacement.
14.
While pile driver is used in closed areas of work environment such as tunnels, trenches and
deep
groove, it’s necessary to guarantee normal air circulation to avoid waste gas poisoning
and
suffocation.
15.
Before transport, empty fuel inside Fuel Tank to avoid leakage.
16.
Non-professional maintenance staff are prohibited from dismounting pile driver to avoid
structural
damage of parts, shortened service life of pile driver or accidents.
17.
Before transport, empty fuel inside the oil pot to avoid leakage.
18.
Non-professional maintenance staff are prohibited from dismounting pile driver to avoid structural
damage of parts, shortened service life of pile driver or accidents.
Loading ...
Loading ...
Loading ...