Loading ...
Loading ...
Loading ...
5. Health and Safety Information
– 6 –
EN
Important: Read all Health and Safety instructions
before attempting to operate, maintain or repair this
product. Non-compliance with these instructions may
result in injury or damage to the user or the product.
5.1 General Health and Safety
Precautions
• Only authorised personnel who have carefully read
and understood this manual may operate, adjust and
repair this product.
• Observe all standard safety precautions and good
practices when working with air tools.
• Always wear adequate eye protection and a face mask
when using this product.
− Some products suitable for use with this product
may contain chemicals or toxic components.
− Avoid inhalation or contact with materials used
with this product.
− If contact occurs, seek medical advice as soon as
possible.
• Wear ear defenders and protective gloves while using
this product.
• Keep your work environment clear and well-lit, with
bystanders at a safe distance.
• Use this product ONLY in well-ventilated areas to
avoid the build-up of fumes and allow paint particles
to disperse.
• Keep out of reach of children.
• Before every use, inspect the tools for missing,
broken, loose or corroded parts.
Important: DO NOT use this product if it is damaged
in any way. Contact Draper Tools to discuss repair and
replacement options.
• Ensure that all accessories and attachments are
securely tightened before use.
• Use the product only in the manner instructed in this
manual.
• DO NOT modify this product in any way.
• ONLY use spare parts supplied by Draper Tools.
• Stay alert at all times; DO NOT use this product while
tired or under the inuence of alcohol, drugs or other
medication.
5.2 Additional Safety Instructions for Air
Tools
• Compressed air can cause severe injury.
− ALWAYS turn o and disconnect the air supply
before making any adjustments to the product or
leaving it unattended.
− NEVER direct this product towards yourself or
others.
− Ensure that compressed air is not blocked by or in
contact with any part of your body.
• ONLY use clean, dry and regulated compressed air.
WARNING! NEVER use oxygen, combustible
gases or other bottled gasses as a supply for
this product. Use of these substances may
cause the product to explode.
• Use of a whip hose between the tool and the air supply
is recommended to reduce vibration.
CAUTION! Whipping hoses can cause severe
injury. Always check for and replace
• Ensure that the product is compatible with the air
supply before use.
• Ensure all connections are securely tightened.
• DO NOT exceed the maximum stated air pressure.
− The pressure of the connected air supply MUST
NOT exceed more than 10% of the rated pressure
of the product.
• DO NOT obstruct the ability of the trigger to release
once depressed.
• NEVER carry the tool by the hose.
• Some parts of the spray gun may become hot during
use.
− Allow the nozzle and paint cup to cool after use
before handling or adjusting them.
• NEVER spray ammable substances near open ames
or sources of heat and ignition.
− DO NOT smoke in the vicinity of this product.
• DO NOT use this tool in temperatures that do not fall
within 0–40°C.
Loading ...
Loading ...
Loading ...