Loading ...
Loading ...
Loading ...
– 11 –
EN
3 Fig.
2 Fig.
7. Preparation Instructions
7.2 Cleaning the Product and Accessories
Before First Use
Before rst use, the spray guns must be cleaned
thoroughly to remove any oil, grease, and the protective
lm applied before shipment.
1. Disassemble the spray gun and immerse all parts and
accessories in spray gun cleaning uid.
2. Soak the parts for a few minutes.
3. Allow the parts to dry and then wipe them clean with
a damp cloth.
4. Assemble the spray gun (see 7.4) and half-ll the
paint cup (8) with thinners.
Important: DO NOT connect the spray gun to the
regulator or air line at this time.
5. Squeeze the trigger (12) to ush the thinners through
the spray gun until the paint cup is empty.
6. Immerse and soak the assembled spray gun in the
cleaning uid for a few more minutes.
7. Allow the parts to dry and wipe them clean.
7.3 Replacing the Nozzle
The spray gun is supplied with two nozzles. To replace
the nozzle, the installed nozzle assembly must be
removed and replaced with the appropriate parts.
1. Unscrew the air cap lock ring (2) and remove the air
cap (1) from the spray gun body (Fig. 2).
2. Use the M6 spanner (H4) to unscrew and remove the
nozzle head (13) (Fig. 3).
3. Rotate the uid control dial (4) anticlockwise until it
comes away from the spray gun body.
(2)
Loading ...
Loading ...
Loading ...