Loading ...
Loading ...
Loading ...
– 12 –
EN
7. Preparation Instructions
7 Fig.
6 Fig.
5 Fig.
4. Remove the spring (14) and uid needle (5) from the
chamber via the back of the spray gun (Fig. 4).
5. Screw the new nozzle head onto the front of the spray
gun.
6. Ensure that the new uid needle (5) is free from debris
and insert it point-rst into the needle chamber
through the back of the spray gun body (Fig. 5).
7. Pass the spring onto the at end of the uid needle
and screw the uid control dial back into place.
8. Screw the new air cap onto the spray gun body and
test the trigger to ensure smooth operation.
7.4 Assembly, Filling and Connection to
the Air Supply
Important: It is recommended to use a 1/4" BSP thread
whip hose (Stock No. 54438) to connect the spray gun to
an air line in order to reduce vibration.
1. Attach the paint cup (B) to the threaded socket
beneath the spray gun nozzle (Fig. 6).
2. Rotate the uid control dial (4) clockwise as far as
possible to close the uid valve (Fig. 7).
(5)
(B)
(4)
4 Fig.
(14)(5) (4)
Loading ...
Loading ...
Loading ...