Greenworks ST48L4410 2 x 24V 48V 16" Brushless Cordless Attachment Capable String Trimmer, 2 4.0Ah USB Batteries and Dual Port Rapid Charger Included

User Manual - Page 12

For ST48L4410.

PDF File Manual, 40 pages, Read Online | Download pdf file

ST48L4410 photo
Loading ...
Loading ...
Loading ...
The recommended ambient temperature range:
Item Temperature
String trimmer storage tem-
perature range
32°F (0°C) - 113°F (45°C)
String trimmer operation
temperature range
32°F (0°C) - 113°F (45°C)
Battery charging temperature
range
39°F (4°C) - 104°F (40°C)
Charger operation tempera-
ture range
39°F (4°C) - 104°F (40°C)
Battery storage temperature
range
32°F (0°C) - 113°F (45°C)
Battery discharging tempera-
ture range
32°F (0°C) - 113°F (45°C)
13 TROUBLESHOOTING
Problem Possible Cause Solution
The ma-
chine does
not start
when you
push the
trigger.
No electrical con-
tact between the
machine and the
battery pack.
1. Remove battery pack.
2. Check contact and in-
stall the battery pack
again.
The battery pack is
depleted.
Charge the battery pack.
The lock-out but-
ton and trigger are
not pushed at the
same time.
1. Pull the lock-out but-
ton and hold it.
2. Pull the trigger to start
the machine.
Problem Possible Cause Solution
The ma-
chine stops
when you
cut.
The guard is not
attached to the ma-
chine.
Remove the battery pack
and attach the guard to
the machine.
Heavy cutting line
is used.
Use only with the nylon
cutting line of 0.095" (2.4
mm) diameter.
Grass winds
around the motor
shaft or the trim-
mer head.
1. Stop the machine.
2. Remove the battery
pack.
3. Remove the grass from
the motor shaft and trim-
mer head.
The motor is over-
loaded.
1. Remove the trimmer
head from the grass.
2. The motor will recover
to work as soon as the
load is removed.
3. When you cut, move
the trimmer head in and
out of the grass to be cut
and remove no more than
8" in length of the grass
being cut per pass.
The battery pack
or machine is too
hot.
1. Cool the battery pack
until its function returns
to normal. This is best
done by bringing the bat-
tery into the shade or in-
doors.
2. Cool the machine for
approximately 10 mi-
nutes. Remove the bat-
tery from the tool to help
the tool cool down more
quickly.
The battery pack is
disconnected from
the tool.
Install the battery pack
again.
The battery pack is
depleted.
Charge the battery pack.
12
English
EN
Loading ...
Loading ...
Loading ...