Loading ...
Loading ...
Loading ...
Beverage Cooler | 8
Operating Instructions
Follow steps below if you want to change the door orientation from left-hinge to right-hinge:
1. Remove top hinge cover and 3 top hinge screws which are below it. Then remove top hinge.
2. Remove 1 cabinet plug and 1 door handle plug.
3. Remove the door.
4. Remove right and left leveling legs.
5. Remove the bottom hinge and 3 bottom hinge screws.
6. Install the bottom hinge on the other side of the leveling legs with 3 bottom hinge screws.
7. Install right and left leveling legs. There are two holes below the beverage cooler to fit the two leveling legs.
8. Install the door.
9. Install the top hinge on the other side with 3 top hinge screws.
10. Install top cover above the top hinge and install 1 cabinet plugs on the other side.
11. Adjust the leveling legs.
1
2
3
4
7
5
8
1
Top hinge cover
2
Top hinge screws
3
Top hinge
4
Cabinet plug
5
Bottom hinge
6
Door handle plug
7
Bottom hinge screw
8
Leveling legs
Do not tilt the appliance over
45° as possible damage to the
sealed system may occur.
Loading ...
Loading ...
Loading ...