Loading ...
Loading ...
Loading ...
Beverage Cooler | 7
Operating Instructions
Use two or more people to move and install beverage cooler. Failure to do so can result in back or other injury.
• Keep in upright position for 24 hours before initial power up.
• Plug into a grounded outlet.
• The temperature of the beverage cooler can be controlled manually by the Temperature
Knob. Setting 1 is the warmest setting, while setting 7 is the coldest. When you turn the
unit on for the first time, set the dial on 4 and allow 24 hours for the refrigerator to reach
this temperature. Turn the Temperature Knob to adjust to the temperature that best
meets your needs. Turning the dial to 0 stops the cooling but does not turn the power off.
• Reducing the frequency of door opening can lower power consumption.
• Before loading cans, cool the unit to the set temperature and do not load too many cans at one time.
• The maximum capacity is 51 cans when laid vertically.
• To achieve the maximum capacity, place 30 cans in the top rack as shown below in Figure A.
• Next, place 21 cans in the bottom rack as shown below in Figure B.
• Store beverages in sealed bottles only.
Excessive Weight Hazard
WARNING
0
1
2
3
4
5
6
7
Fig. A
Fig. B
BEVERAGE STORAGE
INSTALLATION
Loading ...
Loading ...
Loading ...