Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/69968910-vrm050701n/bg6.png)
Beverage Cooler | 6
Parts List
• Before using the cooler, remove all packaging materials, including bottom cushions, foam pads, and tape inside
the cooler. Tear off the protective film on the door and the cooler body.
• Make sure the cooler is placed in a well-ventilated, indoor environment on flat, sturdy ground (turning clockwise to
raise the appliance, and counter-clockwise to lower the appliance).
• Leave a minimum of 2” between each side of the appliance and the wall. The top and back of the appliance should
have a minimum 2” clearance. This allows for proper air circulation.
• Avoid putting the cooler in direct sunlight or too close to a heat source. Keep a safe distance of at least 12 inches
between the cooler and a stove or furnace if it can’t be avoided. We also advise applying an insulation board in
that case.
• Install the appliance in a location where the temperature is between 55°F and 90°F. For best performance, do not
install the beverage cooler behind a cabinet door.
1
5
4
3
2
PLACEMENT
1
Glass Door
2
Wire Shelf Racks
3
Temperature Knob
4
Base Rack
5
Leveling Leg
Loading ...
Loading ...
Loading ...