Loading ...
Loading ...
Loading ...
Beverage Cooler | 11
Unplug the power plug from the socket to disconnect the cooler.
Dusting behind the cooler and on the ground will improve the cooling effect and save energy. The interior of the
cooler should be cleaned to avoid any odor. Follow the cleaning procedure below:
1. Unplug the cooler.
2. Wipe the door and door seal with warm water and mild detergent. Rinse thoroughly and dry with a clean, soft
cloth.
3. Use a mixture of warm water and baking soda (about 1-2 tablespoons per quart of water) to clean the interior of
the cooler.
4. Use a sponge or soft cloth and make sure to wipe excess moisture out before cleaning around the controls.
5. Rinse thoroughly with warm water and dry with a clean soft cloth.
6. Reconnect the cooler when the cooler is clean and dry.
Note:
Do not use hard brushes, wire brushes, abrasives, organic solvents, boiling water, acid, or alkaline items as this may
damage the cooler surface and interior.
1. Unplug the cooler.
2. Remove all beverage and securely tape down all loose items inside.
3. Tape the door shut. Do not pull the door or door handle when moving.
4. Do not tilt over 45 degrees as possible damage may occur to the sealed system when moving.
5. Avoid strong vibration when moving.
When a power failure occurs, the beverage cooler can normally keep beverage cool for several hours. Do not put
additional beverage into the appliance during a power failure, and avoid opening the door. The beverage cooler will
automatically resume working when the power has been restored.
Remove all beverage while you plan to leave for an extended period of time.
Turn off and unplug the appliance. And leave the door open.
Cleaning & Maintenance
DISCONNECTING THE BEVERAGE COOLER
CLEANING YOUR BEVERAGE COOLER
MOVING
Use two or more people to move and install beverage cooler. Failure to do so can result in
back or other injury.
WARNING
POWER FAILURE
VACATION
Loading ...
Loading ...
Loading ...