Loading ...
Loading ...
Loading ...
and then press the button you need to get the help information for.
12. USB HOST Interface
External storage device (USB disk) can be accessed for saving or loading settings files.The
file system format of the external storage device is FAT32 and the memory is no more than
32G.
1.3Rear Panel
1. CH1/CH2 Sync/ExtMod/TrigConnector
BNC connector with 50Ωnominal output impedance and 1KΩnominal input impedance.
Its function is determined by the current working mode.
Sync:
When 1Outputis enabled, this connector outputs the sync signal corresponding to the
current settings of CH1 (refer to the introduction in
Sync).
ExtMod:
If modulation mode is enabled for CH1, and external modulation source is used, this
connector accepts an external modulation signal.
Trig:
If CH1 is in sweep or burst mode and external trigger source is used, this connector
accepts an external trigger signal (the polarity of the signal can be set).
2. CH3 SYNC Output Connector
BNC connector with 50Ω nominal output impedance.
When CH3 output is turned on, the connector outputs the sync signal corresponding to the
current settings of CH3 (refer to the introduction in
Sync).
User Manual 9
Loading ...
Loading ...
Loading ...