Loading ...
Loading ...
Loading ...
9
en
Before using for the rst time
7. Lift the pan out of the appliance interior.
8. Remove the packaging material that
is on the appliance and the accessory
parts.
9. Check all parts for completeness.
X Figure A
10. Check the appliance and the accessory
parts for visible damage.
Caution!
Never operate a damaged appliance!
11. Thoroughly clean and dry all parts
before using for the rst time. X “Care
and daily cleaning” see page 16
12. After cleaning, insert the pan back into
the appliance interior.
Caution!
Before inserting the pan, check that the
appliance interior is dry and clean.
13. Insert the lid insert
Insert the lid insert into the 2 ducts at the
bottom and press into the lid at the top.
14. Close the lid
Press the lid down until it clicks
into place.
15. Insert the steam outlet
Place the steam outlet onto the lid from
above and press down rmly.
16. Connect the supplied mains cable to the
appliance rst and then connect it to the
socket.
W Risk of re!
After plugging in, always check whether
a programme is run automatically
(Auto-Restart function). If an unwanted
programme starts running, press button H
to stop the programme and to enter standby
mode.
On the control panel, buttons B and G
and all LEDs briey light up once and a ve-
level audible signal sounds. Button B then
ashes. The appliance is in standby mode
and is ready for operation.
Caution!
Use only the supplied mains cable.
Loading ...
Loading ...
Loading ...