Loading ...
Loading ...
Loading ...
6
UNPACK THE APPLIANCE
Remove all packing materials from inside the appliance. Remove
the protective lm from the touch control area. Additionally,
remove the feature sticker, if there is one, from outside of the
Sharp Microwave Drawer
™
Oven. Check the drawer for any
damage, such as misaligned or bent drawer, damaged drawer
seals and sealing surfaces, broken or loose drawer guides and
dents inside the cavity or on the front side of the drawer. If there
is any damage, do not operate the Sharp Microwave Drawer
™
Oven and contact your dealer or a Sharp Authorized Servicer.
IMPORTANT: DO NOT REMOVE THE WAVEGUIDE
COVER LOCATED ON THE TOP OF THE OVEN CAVITY.
Sealing
Surface
Oven
Cavity
Waveguide
Cover
Sealing
Surface
BEFORE OPERATING
• Read and understand all instructions in this Operation
Manual.
• Ensure the appliance is properly installed and connected to
power according to all instructions in the included Instal-
lation Manual.
• Ensure all protective packaging materials and tape have been
completely and correctly removed.
CONDITION OF UNIT
Do not operate any appliance with a damaged cord or after the
appliance malfunctions or has been damaged in any manner.
Return the appliance to the nearest authorized service facility
for examination, repair or adjustment.
SERVICE AND REPAIR WARNING
Do not repair or replace any part of the Sharp Microwave
Drawer
™
Oven. If the display, oven or touch controls fail, consult
a Sharp Authorized Servicer.
RADIO OR TV INTERFERENCE
If any interference to your radio or TV is caused by the Sharp
Microwave Drawer
™
Oven, check if the appliance is on a dif-
ferent electrical circuit, relocate the radio or TV as far away
from the appliance as feasible or check position and signal of
receiving antenna.
GROUNDING
INSTRUCTIONS
This appliance must be grounded. The Sharp Microwave
Drawer
™
Oven is equipped with a cord having a grounding wire
with a grounding plug. It must be plugged into a wall receptacle
that is properly installed and grounded in accordance with the
National Electrical Code and local codes and ordinances. In
the event of an electrical short circuit, grounding reduces risk
of electric shock by providing an escape wire for the electric
current.
Improper use of the grounding plug can result
in a risk of electric shock. Do not use an extension cord. If the
power supply cord is too short, have a qualied electrician
or serviceman install an outlet near the appliance.
If you have any questions about the grounding or electrical
instructions, consult a qualied electrician or service person.
PRODUCT DISPOSAL
This product may not be treated as household waste. To dispose
of the appliance, deliver it to an applicable collection point for
the recycling of electrical and electronic equipment. Dispose
of this product correctly to prevent negative consequences for
the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please
contact your local city ofce, your household waste disposal
service or the shop where you purchased the product.
ABOUT THE MICROWAVE OVEN
ABSORB MICROWAVE ENERGY
When the Sharp Microwave Drawer
™
Oven is in use, ALWAYS
have food in the cavity to absorb the microwave energy. The
Sharp Microwave Drawer
™
Oven is for food preparation only.
It should not be used to dry clothes or newspapers.
OPEN AND CLOSE CAREFULLY
When opening or closing the Sharp Microwave Drawer
™
Oven
quickly, food in the oven may be spilled. See CLEANING AND
CARE on page 21.
WARM EXTERIOR IS NORMAL
It is normal for the exterior of the Sharp Microwave Drawer
™
Oven to be warm to the touch when cooking or reheating.
IMPORTANT INFORMATION
Loading ...
Loading ...
Loading ...