Loading ...
Loading ...
Loading ...
21
CLEANING AND CARE
EXTERIOR
The outside surface is precoated metal and plastic. Clean the
outside with mild soap and water, then rinse and dry with a soft
cloth. Do not use any type of household or abrasive cleaner.
STAINLESS STEEL SURFACE
The exterior should be wiped often with a damp soft cloth and
polished with a dry soft cloth to maintain its beauty. There is
also a variety of products designed especially for cleaning and
shining the stainless exterior of the oven. We recommend the
cleaner be applied to a soft cloth and then carefully used on the
stainless exterior rather than sprayed directly on to it. Follow
package directions carefully.
FRONT SIDE OF THE DRAWER
Wipe the window on both sides with a damp soft cloth to remove
any spills or spatters. Metal parts will be easier to maintain if
wiped frequently with a damp soft cloth. Avoid the use of spray
and other harsh cleaners, as they may stain, streak or dull the
drawer surface.
TOUCH CONTROL PANEL
The touch-pads may be deactivated before cleaning the control
panel. To lock the control panel, touch and hold
pad for 3
seconds.
LOCK ON
appears on the display.
Wipe the panel with a soft cloth slightly damped with water
only, then wipe dry with a dry soft cloth. Do not scrub or use
any sort of chemical cleaners.
To unlock the control panel, Touch and hold
pad for 3 seconds.
LOCK OFF
appears on the display. Touch STOP/CLEAR pad.
INTERIOR
Cleaning the interior is easy because no heat is generated to
interior surfaces, thus there is no baking and setting of spills or
spattering. To prevent the drawer closing and opening during
cleaning, lock the control panel.
To clean interior surfaces, including drawer sealing surfaces,
wipe with a damp soft cloth. For heavier soil, use mild soap and
wipe clean with a damp soft cloth.
IMPORTANT: DO NOT USE ABRASIVE OR HARSH
CLEANERS, CHEMICAL OVEN CLEANERS OR SCOUR-
ING PADS.
DRAWER
GUIDES
Remove the food crumbs from the drawer guides. Wipe with a
dry soft cloth keep the Sharp Microwave Drawer
™
Oven opening
and closing smoothly.
WAVEGUIDE COVER
ATTENTION
The waveguide cover, located on the inside top
of the Sharp Microwave Drawer
™
Oven area, is made from
mica, so it requires special care. Keep the waveguide cover
clean to assure good microwave performance. Use a damp
soft cloth to carefully wipe any food spatters from the surface
of the cover immediately after they occur. Built-up splashes
may overheat and cause smoke or catch re. Do not remove
the waveguide cover.
ODOR REMOVAL
Occasionally, a cooking odor may remain in the Sharp Micro-
wave Drawer
™
Oven. To remove odor, combine 1 cup water,
grated peel and juice of one lemon and several whole cloves in
a 2-cup glass microwave-safe measuring cup. Boil for several
minutes using 100% power. Leave in the Sharp Microwave
Drawer
™
Oven until water cools. Wipe interior with a soft cloth.
Loading ...
Loading ...
Loading ...