Loading ...
Loading ...
Loading ...
I
ASSEMBLY SECTION: PAGES 8 - 11
Assembly Step 1
Assemble the Rail
I
To avoid installation difficulties, do not run the garage
door opener until instructed to do so.
Rail
Support --
Braces
Straight
DoorArm
Extend
End RaiIs
Outward Remove
Cardboard Packing
Center
Rail
Trolley Rack
Rail Assembly
Carton / / _
Remove
Cardboard Packing
Extend
End Raits
Outward
1. Turn the opened rail carton upside down, emptying its
contents onto a level work snrt:ace.
2. Unfold the rails, taking care to avoid kinking the screw
rod joints.
3. Rotate the rail sections so that the flat side is down and
the screw side is up for all three lengths. Keep it clean
and free of debris while you are working.
Rail Assembly
Hardware Bag
Sprocket End Rail
Chassis Assembly
Hardware Bag
I
Rail
Sprocket
Rotate
Trolley Rack
Door End Rail
Center Rail
CAUTION: During assemblk; avoid pulling the rail
section housing the trolley rack away from the sere,,
rod. The rack is factory set about 9"from the end of the
screw rod to the center of the rack.
If the plastic liner slides part way out during assembly,
simply push it back in.
Loading ...
Loading ...
Loading ...