Snow Joe 24V-X2-13SS-CT OPERATOR’S MANUAL

Loading ...

Charging the Batteries

1. Press the push lock buttons on the batteries to pull them

out of the equipment (Fig. 1).

Push lock button

Fig. 1

2. Depending on your Snow Joe

+ Sun Joe

charger model,

how to recharge your lithium-ion battery will vary.

You may either insert your 24-volt battery into the

24VCHRG-QC Quick Charger (sold separately) or the

24VCHRG-DPC Dual Port Charger (sold separately)

(Figs. 2 – 3).

3. The battery indicator LEDs will illuminate one by one during

the charging process. Unplug the charger immediately when

the 3 LEDs are all illuminated.

4. The 24VCHRG-QC Quick Charger (sold separately) and

the 24VCHRG-DPC Dual Port Charger (sold separately)

are also equipped with additional charging indicating lights

which will indicate the charging status (Figs. 2 – 3).

mCAUTION! FIRE HAZARD. When disconnecting the

charger from the battery, be sure to unplug the charger from the

outlet ﬁrst, then disconnect the charger from the battery.

mWARNING! The chargers do not automatically turn

oﬀ when the battery is fully charged. Please take care not

to leave the battery plugged into the charger. Switch oﬀ or

unplug the charger at the mains when charging is complete.

5. Timely recharging of the battery will help prolong the

battery's life. You must recharge the battery pack when you

notice a drop in the equipment's power.

IMPORTANT! Never allow the battery pack to become fully

discharged as this will cause irreversible damage to the battery.

6. When charging is complete, remove the battery from the

charger by pulling the push lock button and sliding the

battery backward to unlock it from the charger.

Fig. 2

Battery pack

24VCHRG-QC

Quick Charger

(Sold separately)

red

Charging

green

Fully

Charged

Fig. 3

Battery pack

24VCHRG-DPC

Dual-Port Charger