Turbofan G32D4 AND SK32 STAND Full Size Tray Digital / Gas Convection Oven on a Stainless Steel Stand

Installation Operation Manual - Page 11

For G32D4 AND SK32 STAND.

PDF File Manual, 37 pages, Read Online | Download pdf file

G32D4 AND SK32 STAND photo
Loading ...
Loading ...
Loading ...
Operation
9 9
This oven is intended for use in a commercial kitchen and must only be put to the use for which it was intended, i.e. cooking food
product. To use this oven correctly please read the following sections carefully:-
Temperature Display -
Shows pre-set chamber temperature.
When used with the Tempkey, dis-
play shows actual oven temperature for 5 sec-
onds.
Shows cooking programs and error codes.
SteamKey and LED -
Used to set moisture level or to
provide a manual injection of moisture
when in Manual Moisture Mode.
LED is Onwhen automatic moisture injection is
set or when moisture is manually injected.
Temperature Adjustment Control
Time Display -
Shows cook time in full minutes only
from 180 - 10, and in minutes and seconds for
the final 10 minutes.
NOTE:
In Core Temp Mode, time display alternates
between CPand set core probe temperature.
On/OffKey and LED -
Press On/Offkey once to turn the
oven On’.
Press and hold On/Offkey for 1.5
seconds to turn the oven Off’.
Time Adjustment Control
NOTE: In Core Temp Mode, Timerknob is
used to set core probe temperature.
ProgramKey and LED -
Used to select cooking programs and to
set program operator settings.
TempKey and LED -
Displays actual oven temperature for 5
seconds on Temperature Display. LED
Onwhen heating element is on
(heating indicator).
LED flashes when Upper Display is showing
actual temperature.
NOTE:
In Core Temp Mode, this key is used to
display Actual Oven Temperature (Upper
Display) and Core Probe Temperature (Lower
Display).
LightKey and LED -
Switches oven lights On/Off’. LED is
Onwhen oven lights are On’.
Timer-Start/StopKey & LED -
The Timer-Start/Stopkey is used to
control the following functions:-
Cancelling Alarm (All Modes).
Starting Core Temp Mode (Core Temp
Mode).
Starting Timer (Manual Mode).
Re-setting Timer (Manual Mode).
Starting Program (Program Mode).
Cancelling and Re-setting Program
(Program Mode).
Core Probe Connection Point
Loading ...
Loading ...
Loading ...