VDIAGTOOL VD30 User Manual

Loading ...

9.2.1 Spark IGN Required Monitors

In this menu, the operators can congure monitors for spark ignition cars (gasoline engines).

To congure spark IGN required monitors:

1. Use the UP / DOWN key to highlight Spark IGN required Monitors from menu and press the

ENTER key to conrm.

2. The custom monitors selsction screen displays.

3. Use the RIGHT key to select or deselect a monitor or press the LEFT key to deselect all the

monitors. Press the ENTER key to conrm and BACK key to cancel.

9.2.2 Compression IGN Required Monitors

In this menu, the operators can congure monitors for compression ignition cars (diesel engines).

To cingure spark compression required monitors:

1. Use the UP / DOWN key to highlight Compression IGN Required Monitors from the menu and

press the ENTER key to conrm.

2. The custom monitors selection screen displays and Use the RIGHT key to select or deselect a

monitor or press the LEFT key to deselect all the monitors/ Press the ENTER key to conrm and

BACK key to cancel.

NOTE

Non-Continuous monitors are dierent for spark ignition cars (gasoline engines) and comperssion

ignition card (diesel engines).

Spark ignition vehicles (Gas)

•Catalyst (CAT)

•Heated Catalyst

•Evaporative (EVAP) System

•Seconda Air System

•Oxygen (O2) Sensor

•Oxygen Sensor Heater

•GER (Exhaust Gas Recirculation) and / or VVT System

Compression ignition vehicles (Diesel)

•NMHC Catalyst

•NOx / SCR After treatment

•Boost Prseeure

•Exhaust Gas Sensor

•PM Filter

•EGR and / or VVT System

To conigure monitors:

Use the UP / DOWN key to highlight Congure Monitors from Setup menu and press the

ENTER key to conrm.

NOTE

The number to the upper right comer of display indicates the total number of optional monitors and

sequence of currently selected monitor.

OBDII / EOBD+CAN VD30 Code Reader User Manual

Loading ...

VDIAGTOOL VD30 OBD2 Scanner Diagnostic Tool, Vehicle Check Engine Light Car Code Reader Scan Tool