Loading ...
Loading ...
Loading ...
4.2 Erase Codes
There are two ways to erase codes:
•Press the Erase hot key to erase codes from home screen.
•Traditional way: Select Erase Codes from the diagnostic menu.
1. Press the Erase hot key to directly erase the codes from the home menu. Or use the UP / DOWN key
to highlight Erase Codes from Diagnostic Menu and press the ENTER key.
2. Follow the on-screen instructions and answer questions about the vehicle being tester to complete
the procedure.
3. Check the codes again. If any codes remain, repeat the Erase Codes steps.
4.3 Live Data
Live Data menu lets you view, record and playback real time PID data from the electronic control
module.
•View Data
•Record Data
•Playback Data
4.3.1 View Data
The View Data function allows real time viewing of the vehicle’s electronic control unit’s PID data,
including sensor data, operation of switches, solenoids and relays.
Menu options typically include:
•Complete Data
•Custom Data
•Graph Data Set
•Unit of measure (Please refer to Chapter 7 System Setup)
4.3.1.1 Complete Data Set
Complete Data Set displays all suppoed PIDs of the cehicle being tester.
To view all live PID data:
1. Use the UP / DOWN key to highlight Live Data from Diagnostice Menu and press the ENTER key.
2. Select View Data or Complete Data Set from the list and press ENTER key to conrm.
3. Press the ENTER key to view PID graph if the PID gives a numeric reading.
4.3.1.2 Custom Data List
Custom Data List menu lets you to minimize the number of PIDs on the data list and focus on any
suspicious or symptom-specic data parameters.
To create a custom data list:
1. Select Custom List from the menu and press the ENTER key.
2. Use the RIGHT key to select or deselect a line or press LEFT key to deselect all if needed. Press the
ENTER key to conm and BACK key to cancel.
OBDII / EOBD+CAN VD30 Code Reader User Manual
6
Loading ...
Loading ...
Loading ...