Loading ...
Loading ...
Loading ...
Or
4.6 On-Board Monitor Test
The On-Board Monitor Test function is useful after seicing or after clearing a vehicle ECU's memo.
It receives test results for emission-related powerain components and systems that are not
continuously monitored for Non-CAN vehicles. And for CAN vehicles, it receives test data for
emission-related powerain components and systems that are and are not continuously
monitored. It is vehicle manufacturer who is responsible for assigning test and component IDs.
To request on-board monitor test results:
1. Use the UP / DOWN key to highlight On-Board Monitor Test from Diagnostic Menu and press
the ENTER key.
2. Depending on the protocol the vehicle used, one of these 2 screens shows
NOTE
Test results do not necessarily indicate a faulty component or system
OBDII / EOBD+CAN VD30 Code Reader User Manual
11
This diing cycle 1
MIS
OK
FUEL
OK
CCM
OK
CAT
INC
HCAT
N/A
EVAP
N/A
AIR
N/A
Since DTCs cleared 8
O2S
INC
HTR
INC
EGR
INC
Since DTCs cleared 1
MIL
OFF
MIS
N/A
FUEL
N/A
CCM
OK
CAT
N/A
HCAT
N/A
EVAP
N/A
Since DTCs cleared 8
AIR
N/A
O2S
N/A
HTR
N/A
EGR
N/A
Loading ...
Loading ...
Loading ...