Loading ...
Loading ...
Loading ...
E-61
To split the keyboard and then layer tones
Example: To set “065 BRASS SECTION” as the main
tone.
Example: To set “048 PIZZICATO STRINGS” as the
split tone.
• After specifying the split tone, press the SPLIT but-
ton to unsplit the keyboard.
Example: To set “064 FRENCH HORN” as the layered
tone.
Example: To specify the “050 STRINGS” tone, enter 0,
5, 0.
• Press the LAYER button to unlayer the keyboard, and
the SPLIT button to unsplit it.
oFF Touch : 1 Light : 2 Normal : 3 Heavy
Off
❚
NOTE
• The main tone sounds over Channel 1, the layer tone over Chan-
nel 2, the split tone over Channel 3, and the layer/split tone
over Channel 4. You can also use the Mixer to change the tone
and volume settings for these channels.
Using Touch Response
When touch response is turned on, the relative volume of
sound output by the keyboard is varied in accordance with
the amount of pressure applied, just like an acoustic piano.
To turn touch response on and off
• This displays the Touch Response setting screen.
• “1 Light” outputs powerful sound even with light key
pressure, while “3 Heavy” requires very heavy key
pressure to output powerful sound.
• Pressing [+] and [–] at the same time returns sensitiv-
ity to the “2 Normal” setting.
• When you select “oFF Touch”, the tone does not
change regardless of how much pressure you apply
to the keyboard. This causes the TOUCH RESPONSE
indicator to disappear from the display.
❚
NOTE
• Touch response not only affects the keyboard’s internal sound
source, it also is output as MIDI data.
• Song Memory playback, accompaniment, and external MIDI
note data does not affect the touch response setting.
703A-E-063A
Loading ...
Loading ...
Loading ...