Loading ...
Loading ...
Loading ...
E-45
703A-E-047A
Setup Names
You can assign setups into one of 16 areas, which you can
select using BANK buttons 1 through 4 and the four REGIS-
TRATION buttons. Area names range from 0-1 through 3-4
as shown below.
1 Use the BANK button to select the bank. Each press of
BANK cycle through the bank numbers from 0 to 3.
2 Pressing one of the REGISTRATION buttons (1 to 4) se-
lects the corresponding area in the currently selected bank.
❚
NOTE
• Whenever you save a setup and assign it a setup name, any
setup data previously assigned to that name is replaced with
the new data.
• You can use the keyboard’s MIDI capabilities to save your set-
up data to a computer or other external storage device. See
“Using the Data Download Service” on page E-68 for details.
To Save a Setup in Registration
Memory
• See “Registration Memory Settings” on page E-44 for
details on what data is stored in the registration mem-
ory.
• If you do not perform any operation for about five
seconds after pressing the BANK button, the display
returns to the contents in step 1, above.
• Bank 1 selected.
BANK STORE
21
0-1 0-2 0-3 0-4
1-1 1-2 1-3 1-4
3-1 3-2 3-3 3-4
2-1 2-2 2-3 2-4
1 2 3 4
BANK 0
BANK 1
BANK 2
BANK 3
• The following display appears when you press the 2
button.
❚
NOTE
• The setup is saved as soon as you press a REGISTRATION
button in step 3, above.
To Recall a Setup from Registration
Memory
• If you do not perform any operation for about five
seconds after pressing the BANK button, the keyboard
automatically clears the registration memory recall
screen.
• The setup name along with the message “Recall” ap-
pears on the display.
❚
NOTE
• If you press a REGISTRATION button without using the BANK
button to select a bank first, the last bank number selected is
used.
Loading ...
Loading ...
Loading ...