Loading ...
Loading ...
Loading ...
8. PREPARATION & CONNECTIONS
Note: To make sure the tool is running the latest available software. it is advisable to check for
updates on a frequent basis. Refer to "Register & Update" for details.
8.1 PREPARATION
• Turn the vehicle ignition on.
• Vehicle battery voltage range should be 9-14Volts.
• Throttle should be in a closed position.
8.2 VEHICLE CONNECTION
1. Locate vehicle's DLC socket: The DLC (Diagnostic Link Connector) is typically a standard
16-pin connector where diagnostic code readers interface with a vehicle's on-board computer.
It is usually located 12 inches from the centre of the steering wheel, under or around the
driver's side for most vehicles.
If the DLC cannot be found, refer to the vehicle's service manual for the location.
2. Connect the diagnostic cable into the vehicle's DLC socket.
3. Plug the other end of diagnostic cable into the diagnostic socket of the handset and tighten the
captive screws.
- 9 -
Loading ...
Loading ...
Loading ...