Loading ...
Loading ...
Loading ...
Select Language
Product Serial Number
Device Upgrade
English
9. REGISTER & UPDATE
9.3 METHOD 2: VIA USB CABLE
Note: Make sure the computer has an Internet connection.
1. Connect one end of the USB cable to the USB port of computer, and the other end to the tool.
2. If a newer version is found, a screen similar to Fig. 7 appears.
3. Press [OK] to configure this tool as a USB device. See Fig. 8. (Note: The Serial Number and
Register Code shown in this figure are needed for inputting in Steps 4-6.)
4. Launch the update tool, a screen similar to Fig. 9 will appear.
5. Type in the Serial Number. Click [Device Upgrade] to input the information and click [Submit] to
enter the update page.
Help
4
Boot Version: V10.02
Serial Number:
974990000001
Register Code:
4d001e001151
Check for new version?
Note: Internet connection is
required for PC.
Yes-OKAY No-ESC
Boot Version• V10.02
Serial Number:
974990000001
Register Code:
4d001e001151
Caution:
DO NOT disconnect USB
while downloading.
The unit should be re-powered
after downloading new version.
6. Select the updates you would like to perform or click "Select All", and then click [Download] to
start downloading. (Note: For CR910, only one piece of diagnostic software can be selected
and downloaded.)
7. Once all steps are complete, restart your tool. It will prompt you to upgrade, click [OK] to start
updating. It may take several minutes to finish the update.
8. The update process is complete, your tool is now ready for use.
7 8
9
- 12 -
Loading ...
Loading ...
Loading ...