Loading ...
Loading ...
Loading ...
9. REGISTER & UPDATE
4. The Register Code can be found in your tool. Connect
one end of the USB cable to your tool, and the other end
on the computer.
5. After the tool has powered up and entered the main
menu screen, move the highlight bar on the "Help" icon
and press [OK].
6. Highlight the "Tool Information" in Fig. 3 and press [OK].
7. The Register Code shown in Fig. 4 is the Register Code
needed in step 3.
(Return to step 3 and input the Register Code and then
proceed)
8. Install the TF card from the tool into the supplied USB TF
card adaptor and insert into the USB port of the
computer.
9. Reopen the update tool, select the updates you would
like to perform or click "Select All", and then click
[Download] to start downloading.
(Note: For CR9 l 0, only one piece of diagnostic software
can be selected and downloaded.)
10 Once all steps are complete, reinsert the TF card into the
tool and power the tool via USB cable or via OBD II
cable. A dialog box (Note: If only diagnostic software is
updated and no firmware package is downloaded, this
box will not appear) prompting you to update will pop up
on the screen (See Fig. 6), select [OK].
11. The registration process is complete, your tool is now
ready for use.
DLC Location Information
DTC Library
Abbreviation
Tool information
About OBD
Help
3/5
Tool Information
Boot version:
V02.01
Display program veson:
V02.00
Diagnostic program version:
V11.23
Diagnostic library version:
V11.28
Serial Number:
974990000001
Register Code:
4d001e001151
-Exit
Sure upgrade?
ESC OK
System upgrade
4
5
6
- 11 -
Loading ...
Loading ...
Loading ...