Loading ...
Loading ...
Loading ...
S1 Surface Controls Overview 30
Fader Banking Controls
Bank tracks to the channel strips using the Bank and Nudge switches. Home and End are shortcuts to the first and last banks, re-
spectively.
Bank and Nudge
The Bank and Nudge switches change which tracks are assigned to the channel strips, as follows:
< Bank
Banks 8 tracks to the left. If tracks 17–24 were banked to strips 1–8, pressing < Bank banks tracks 9–16 to strips 1–8.
Pressing the switch
again does nothing because the first bank is already shown.
Bank >
Banks 8 tracks to the right. If tracks 1–8 were banked to strips 1–8, tracks 9–16 are now banked to strips 1–8.
< Nudge
Banks tracks one track to the left. If tracks 2–9 were banked to channel strips 1–8, pressing < Nudge once banks tracks
1–8 to strips 1–8. Pressing
< Nudge again banks tracks 1–7 to strips 2–8.
Nudge >
Banks tracks one track to the right. If pressed once while tracks 1–8 were banked to channel strips 1–8, tracks 2–9 are
banked to strips 1–8.
Bank and Nudge Pro Tools
The S1 Bank and Nudge switches can also bank the Mix and/or Edit windows in Pro Tools. To have Pro Tools follow S1 banking,
in Pro Tools go to
Setup > Preferences, open the Mixing tab, and in the Controllers section enable Edit Window Follows Bank
Selection
and/or Mix Window Follows Bank Selection.
Home and End
Home (Surface SHIFT + < Bank/Home)
Banks tracks 1–16 to the channel strips.
End (Surface SHIFT + Bank >/End)
Banks the last set of tracks to the strips.
Mixer and Close
Not all applications support these switches.
Mixer (Surface SHIFT+ < Nudge/Mixer)
Toggles Mix and Edit windows in Pro Tools.
Close (Surface SHIFT + Nudge >/Close)
Closes any open window in the application.
Fader Navigation controls
EuControl provides “bank stop” which prevents the Bank switches from banking beyond the first or last track. The Nudge
switches, however, do let you navigate beyond the first or last track.
On S3 (only), its Bank and Nudge switches are also used to spill VCAs in Multi-Master mode. For more information, see the
Using EuControl Surfaces.pdf.
Loading ...
Loading ...
Loading ...