Loading ...
Loading ...
Loading ...
S1 Surface Controls Overview 29
Group
Displays the Group Knob Set to configure group or control group (VCA) membership.
In Normal Mode, the first group is displayed, and pressing the Page > Channel Encoder Navigation switch displays the next
group if applicable.
In Channel Mode, up to 8 groups for the currently selected channel can be accessed at once.
Aux
Assigns sends on the Channel Encoders.
In Normal Mode, the first send is displayed, and pressing the Page > Channel Encoder Navigation switch assigns the next set
of sends to the encoders.
In Channel Mode, up to 8 sends for the currently selected channel can be accessed at once.
Mix (Surface SHIFT + Pan/Mix)
Displays the Mix Knob Set to configure track output routing.
Pan
Displays the Pan Knob Set to configure stereo or surround panning. Pan controls are not available for tracks with mono or no
output path assignments.
Channel (Surface SHIFT + Flip/Channel)
Toggles the Channel Encoders between Normal Mode (unlit Channel switch) and
Channel Mode (lit yellow
Channel switch). In Normal Mode, the attentioned track name is underlined to show which track’s pa-
rameters will be expanded in Channel Mode. The switch LED lights yellow when Channel mode is engaged, and orange when both
Channel and Flip modes are engaged.
Flip
Toggles what is currently assigned to the knobs (such as pan or send parameters) to the faders. A vertical double arrow appears
in the channel strip display when the faders and knobs are flipped. Press
Flip again to toggle the faders and knobs back to normal.
You can use Flip mode with Aux sends, for example, to quickly set up headphone mixes using the faders. (The Dock does not fol-
low Flip.)
The switch LED lights green when Flip is engaged, and orange when both Channel and Flip modes are engaged.
Channel Encoder Navigation Switches
Since a Knob Set may have more parameters than encoders, use Back/Top, <Page/Config, and Page>switches to navigate
through available parameters.
Back
Returns to the previous Knob Set. Press Back repeatedly to back out of all sub-menus and display the top of the current Knob
Set.
Top
Returns to the top-level Knob Set.
Config
Enters Config mode, from which you can insert plug-ins and assign sends.
< Page, Page >
Assigns the previous or next set of parameters to the Channel Encoders. The switches light when there is a previ-
ous or next set to go to. For example, if Send A is assigned to the Channel Encoders, pressing the lit yellow
Page > assigns Send B
to the Channel Encoders. In addition,
< Page lights orange if there is a previous page and Config mode is enabled, and lights green
if Config mode is enabled but there is no previous page.
Flip indicator in OLED display
Channel Navigation Switches
The X switch is not yet implemented.
Pan
Kick
1
rw
Loading ...
Loading ...
Loading ...